Posted on

Yamaha XS650 B/C/D 1975-1977 Fuel Petcock Petrol Tank Tap Assembly K&L-TourMax

Yamaha XS650 B/C/D 1975-1977 Fuel Petcock Assembly Tank Tap K&L 18-4175 (TourMax FPC-208R)

Yamaha XS650 B/C/D 1975-1977 Fuel Petcock Petrol Tank Tao Assembly K&L-TourMax Part Number 18-4175

Has that old XS650 been sitting in your garage for decades or did you just find one in a barn ready to convert into a bobber? K&L-TourMax once again has another useful part to keep your vintage Yamaha XS650 on the road at a fraction of the cost of a new OEM Yamaha unit.

Here is our 5 point rundown:

  1. K&L # 18-4175 fits the following models: Yamaha TX500 /A 1973-1974, XS500 B/C/D 1975-1977, XS1, XS1B, XS2-650 1970-1972, XS650 B/C/D 1975-1977, TX750 /A 1973-1974     (NOTE: Does not fit later XS650 Models)
  2. parts.wiki deems these to be sourced from the original equipment manufacturer to Yamaha, made by Teikei or TK Carburetor Co Ltd of Japan (TK).  Being sourced from the original manufacturer, these should be identical to units that Yamaha also uses as an original part.
  3. The OEM Yamaha part Manufacturer Suggested Retail Price (MSRP) is $113.42 and we have seen units on sale for about $74 to over $100. This K&L-TourMax unit MSRP is $32.95 and we have seen price in between $27-$33.  That’s more than 50% off the OEM price for the identical part.
  4. Parts number supersession history is as follows: 256-24510-00-00, 256-24510-01-00, 366-24510-00-00, 447-24510-01-00, 447-24510-02-00
  5. This is for the LEFT SIDE of the tank and mounting holes center to center measurement is 42mm.

NEED ONE? BUY ON AMAZON: http://amzn.to/2h0w043

 

Yamaha XS650 B/C/D 1975-1977 Fuel Petcock Assembly Tank Tap K&L 18-4175 (TourMax FPC-208R)
Yamaha XS650 B/C/D 1975-1977 Fuel Petcock Assembly Tank Tap K&L 18-4175 (TourMax FPC-208R)

Yamaha XS650 B/C/D 1975-1977 Fuel Petcock Assembly Tank Tap K&L 18-4175 (TourMax FPC-208R)

Yamaha XS650 B/C/D 1975-1977 Fuel Petcock Assembly Tank Tap K&L 18-4175 (TourMax FPC-208R)

parts.wiki has more useful information including detailed photos, expanded model applications, product dimensions, package dimensions, part number supersession and OEM reference part numbers can be found in the Product Knowledge Base.


Resources:

Official K&L Supply Website

Official Yamaha Parts Lookup

Yamaha XS650 Forum XS650.com

TK Carburetor Co Ltd.

Yamaha XS650 Wikipedia

Mike’s XS Model ID Info

XS650CHOPPER.COM

Posted on

Yamaha V-STAR 1100 Lower Bowl Carburetor Rebuild Kit

Yamaha XVS1100 V-Star Economy Carburetor Rebuild Kit K&L Supply 18-5192 TourMax KLY-21

Time to rebuild that VSTAR 1100 carburetor?  Don’t need the jets?

K&L Supply / TourMax has a basic rebuild kit to replace the o-rings and float needle valve assembly. K&L, the manufacturer lists the applications as 1999-2006 however parts.wiki has extended the model application years to 1999-2009.  This includes all model variations including California and 49 state models; V Star 1100 Classic, Custom, Silverado and Midnight Custom.

Each kit rebuilds one stock carburetor, front (5EL-14902-40-00) or rear (5EL-14901-40-00) unit.  Kits include the float bowl gasket, float needle valve, float needle valve seat and o-ring as well as other small o-rings in the carburetor. The kit DOES NOT include a new filter mesh screen. One parts.wiki retail source has informed us they sell hundreds of these kits a year. The high sales volume can be attributed to customers frequently needing to replace the float needle valve due to modern fuel containing ethanol. As with all K&L – TourMax kits, these are quality units made in Japan. K&L # 18-5192, TourMax # KLY-21 is the part number offered.   We’ll be documenting the Air Cut-Off Valve, Intake Manifolds, and Fuel Pump Assembly offered by K&L/Tourmax for this model as well, so stay tuned.

Buy on Amazon: http://amzn.to/2gg33lf   
(Please note many websites are not using the correct product image but the item for sale is usually correct. If you are not sure, just double check the manufacturers part number is 18-5192)

Additional Product Info: Here

Yamaha XVS1100 V-Star Economy Carburetor Rebuild Kit K&L Supply 18-5192 TourMax KLY-21
Yamaha XVS1100 V-Star Economy Carburetor Rebuild Kit K&L Supply 18-5192 TourMax KLY-21
Yamaha XVS1100 V-Star Economy Carburetor Rebuild Kit K&L Supply 18-5192 TourMax KLY-21
Yamaha XVS1100 V-Star Float Needle Valve and Seat

References: Official K&L Supply, Official Yamaha Parts Lookup

The Brand names, logos, product names, feature names, and slogans and trademarks at this website are owned by or licensed to their respective Trademark and Service Mark property owners. ©®2016 – 2018 All rights reserved. Materials contained on this Web site may not be used or reproduced without written permission from their respective property owners. Materials that appear within this website are for information purposes only.

Posted on

Motorcycle Fuel Pump Point Switch Repair Kit K&L Supply 18-4615 TourMax FPS-900

K&L Supply 18-4615 Fuel Pump Point Switch Repair Kit TourMax FPS-900

Broken Motorcycle Fuel Pump?

Replacing your fuel pump with a new genuine OEM part can be expensive. Failure of  external tank fuel pumps is often due to the points. The points can get a lot of dirt and corrosion underneath the protective cap. If you can’t correct the problem with a good cleaning, there is a solution to replace the points contact. K&L Supply / TourMax offers a replacement fuel pump point switch to repair the below models at a fraction of the cost of new. This part will only repair the genuine original (OEM) part and may not be compatible with some of the aftermarket fuel pumps out there. Also keep in mind that the entire pump might need to be replaced and you’ll want to use a process of elimination to determine this.

K&L # 18-4615     TourMax # FPS-900

Available on Amazon Here:  http://amzn.to/2g48bwI

parts.wiki Model Applications:
HONDA TRX350D 1986-1989
HONDA CBR600 1987-1998
HONDA VT600 Shadow 1988-1998
HONDA VT750 Shadow 1997-2007
HONDA CBR900RR 1992-1995

KAWASAKI ZX600 ZX-6R 1995-2001
KAWASAKI ZX600E ZX-6R 1993-2001
KAWASAKI ZX750 ZX-7, ZX-7R 1989-2002
KAWASAKI ZX900 ZX-9, ZX-9R 1994-2003
KAWASAKI ZZR600 2005-2008
KAWASAKI ZX1000 ZX-10 1988-1990
KAWASAKI ZG1200 Voyager XII 1992-2003
KAWASAKI VN1500A/C/D Vulcan  1996-1998
KAWASAKI VN1500E Vulcan Classic 1998-2004
KAWASAKI VN1500G Vulcan Nomad 1998-2001

YAMAHA YZF-R6 1999-2002
YAMAHA FZR1000 1987-1995
YAMAHA FZS1000 FZ1 Fazer 2001-2005
YAMAHA YZF1000R 1997
YAMAHA YZF-R1 1998-2001
YAMAHA FJ1200 1988-1993

More parts.wiki Info: HERE

References: Official Kawasaki Genuine Parts Lookup , Keihin , Official Yamaha Parts Lookup, Official K&L Supply Website, Repair Video 

K&L Supply 18-4615 Fuel Pump Point Switch Repair Kit TourMax FPS-900

K&L Supply 18-4615 Fuel Pump Point Switch Repair Kit TourMax FPS-900
K&L Supply 18-4615 Fuel Pump Point Switch Repair Kit TourMax FPS-900

 

Posted on

Yamaha XS650 Carburetor Intake Manifold Boots From K&L-TourMax

Yamaha XS650 1975-1979 Carburetor Intake Boot

Yamaha XS650 Carburetor Intake Manifold Boot From K&L-TourMax  Part Number 11-4210

Do you or your client have a Yamaha XS650 that needs new intake boots? Over the course of time the “Original Equipment Manufacturer” (OEM) parts from Yamaha eventually become “No Longer Available” (NLA).  Although Yamaha has discontinued the intake manifolds for the 1975-1979 XS650 (B/C/D/E/F Models), there is still a quality offering on the market today.  K&L Supply/TourMax 11-4210 has the intake boots for your XS650 sold in a kit.

Here is our 5 point rundown:

  1. The kit fits the 1975-1979 XS650B, XS650C, XS650D, XS650E, XS650F  “standards” as well as the 1974 TX650. 
    1. — It does NOT fit the later model years such as the XS650S Special. See K&L 11-6239 for these later models. Additionally it does not fit the early XS-1 and XS-1B models. 
  2. parts.wiki deems these to be sourced from the original equipment manufacturer to Yamaha, made by Arai Seisakusho Co, Ltd of Japan (ARS).
  3. Since these are original equipment replacements, they are designed for the stock Mikuni BS38 38mm CV carburetors.
  4. It is sold as a kit and includes the LEFT and RIGHT side manifolds as well as the two gaskets. It does not include new clamps to secure the carburetor.
  5. Affordably priced, exact replacement make this a parts.wiki buy for those who are restoring, building a cafe racer, brat, bobber or chopper.

parts.wiki has more useful information including detailed photos, expanded model applications, product dimensions, package dimensions, part number supersession and OEM reference part numbers can be found in the Product Knowledge Base. Or purchase on Amazon

 


Resources:

Official K&L Supply Website

Official Yamaha Parts Lookup

Yamaha XS650 Forum XS650.com

Arai Seisakusho Co Japan

Yamaha XS650 Wikipedia

Mike’s XS Model ID Info

Please note that some 3rd party websites may not display the actual product photo. When shopping, be sure to look for the manufacturer part number. It is our mission to document parts with actual product photos taken by parts.wiki staff.